Nylon (PA6 / PA66) Engineering Plastic
Sheets | Rods | Tubes | Cast Blocks | Custom Machined Components
Nylon, commonly available as PA6 (Polyamide 6) and PA66 (Polyamide 66), is a high-performance engineering thermoplastic known for its excellent mechanical strength, wear resistance, and good chemical resistance. It is one of the most widely used materials in mechanical and load-bearing applications.
In solid form, Nylon is available as extruded and cast sheets, rods, tubes, and blocks for machining and structural applications. Cast Nylon (PA6G) is especially preferred for heavy-duty industrial components due to its improved mechanical strength, reduced internal stress, and better dimensional stability in large sizes.
PE 500 (HDPE) – High Density Polyethylene
Sheets | Rods | Pipes | Fittings | Custom Machined Components
Polypropylene (PP) is a semi-crystalline thermoplastic produced by the catalytic polymerisation of propylene and belongs to the polyolefin family. It is a widely used engineering plastic known for its excellent chemical resistance, high purity, low moisture absorption, and good electrical insulation properties.
PP is lightweight, weldable, easy to fabricate, and suitable for a wide range of industrial, chemical, medical, and fluid-handling applications.
Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.
PET (Polyethylene Terephthalate)
Sheets | Rods | Tubes | Custom Machined Components
PET (Polyethylene Terephthalate) is a high-strength, semi-crystalline engineering thermoplastic known for its excellent dimensional stability, high stiffness, and low moisture absorption. It offers a superior combination of mechanical strength and precision performance compared to many standard engineering plastics.
Solid PET material is available in sheets, rods, and tubes for precision machining applications. Due to its low water absorption and excellent creep resistance, PET is particularly suitable for tight-tolerance components operating under load.
Polypropylene (PP) Plastic-Final
Sheets | Rods | Pipes | Fittings | Custom Machined Components
Polypropylene (PP) is a semi-crystalline thermoplastic produced by the catalytic polymerisation of propylene and belongs to the polyolefin family. It is a widely used engineering plastic known for its excellent chemical resistance, high purity, low moisture absorption, and good electrical insulation properties.
PP is lightweight, weldable, easy to fabricate, and suitable for a wide range of industrial, chemical, medical, and fluid-handling applications.
Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.
POM (Polyoxymethylene) / Acetal – Delrin® & Delrin® AF
Sheets | Rods | Tubes | Custom Machined Components
POM (Polyoxymethylene), commonly known as Acetal and widely recognized under the trade name Delrin®, is a high-performance engineering thermoplastic known for its excellent dimensional stability, high stiffness, low friction, and outstanding machinability.
Among its advanced grades, Delrin® AF (Acetal + PTFE fiber filled) is specifically engineered for low-friction and wear-resistant applications. Delrin® AF combines the strength and rigidity of acetal with the self-lubricating properties of PTFE fibers, resulting in significantly reduced wear, lower coefficient of friction, and improved performance in dry-running environments. This makes it particularly suitable for sliding, bearing, and precision motion components where lubrication is limited or not preferred.
dimensional stability in large sizes.
PVDF (Polyvinylidene Fluoride) EngineeringPlastic
Sheets | Rods | Pipes | Fittings | Custom Machined Components
PVDF (Polyvinylidene Fluoride) is a high-performance fluoropolymer known for its exceptional chemical resistance, high purity, and excellent mechanical strength. It is widely used in demanding chemical, pharmaceutical, and high-temperature industrial environments where long-term reliability is critical.
PVDF material is available in sheets, rods, and pipes for fabrication and precision machining applications. It offers superior resistance to aggressive chemicals, acids, solvents, and oxidizing agents compared to many conventional engineering plastics.
UHMW-PE (PE 1000) – Ultra High Molecular Weight Polyethylene
Sheets | Rods | Profiles | Custom Machined Components
UHMW-PE (Ultra High Molecular Weight Polyethylene), also known as PE 1000, is a high-performance engineering thermoplastic known for its extremely high molecular weight, resulting in exceptional wear resistance and impact strength. It is widely used in applications where abrasion resistance, low friction, and long service life are critical.
In solid form, UHMW-PE is available as sheets, rods, and custom profiles for machining and fabrication. It is extensively used in high-wear environments such as conveyor systems, liners, chutes, guide rails, and impact plates. Its ultra-low coefficient of friction allows smooth sliding performance, making it ideal for material handling and packaging industries.
Virgin PEEK (Polyether Ether Ketone)
Sheets | Rods | Tubes | Custom Machined Components
Virgin PEEK (polyether ether ketone) is a high-performance semi-crystalline thermoplastic known for its exceptional mechanical strength, thermal stability, and outstanding chemical resistance. It is one of the most advanced engineering plastics used in critical industrial, aerospace, oil & gas, medical, and semiconductor applications.
Virgin PEEK is available as sheets, rods, and tubes for precision machining and high-performance structural components. It maintains excellent mechanical properties even at elevated temperatures and offers superior creep resistance under continuous load.
Showing all 8 results